Automatic Cleaning-in-Place (CIP) is an integrated automatic cleaning process designed to maintain hygiene and cleaning of Bulk Milk Cooler with minimum intervention of human. Auto CIP Unit features a programmable interface with ease to amend/ add programs, timelines, dosing, etc. The CIP System cleans pipelines, valves, pumps and tanks.
Features:
• Automatic dosing of chemicals and water
• Pre-installed multiple CIP module
• Provision of recovery heater in case of hot water temperature below 45℃
• Elimination of manual intervention to ensure proper cleaning
• Provision of manual selection in case of power or system failure

The Swinging Cow Grooming Brush provides the best solution and avoid all such difficulties faced by the cattle thereby giving them comfort during such activity. cow health comfort and welfare altogether are improved by grooming brush. With the access to the grooming brush, they are cleaner and happier and spend about fivefold more time for grooming compared with when brushes are not available. And this enhanced comfort results in higher milk yield for the farm overall.
Features:
• Power saving by automatic on/off based on cattle contact
• Longer product life and easy availability of spares
• Comes in ready to mount position
• Swing action in multiple planes provides better access to body parts of cow
• Easy changeover of consumables (eg. Brush)

Ekomilk spectra is a milk analyser which analyses milk on principle of both Mid-infrared and ultrasonic. It brings the best from both technologies together using ultrasound for proven, cost-effective and robust measurement of milk parameters and Mid-Infrared for fast, highly sensitive detection of Adulterants.
Features:
• Simultaneous measurement of Fat/SNF and detection of adulterations
• No acids or other chemicals used for sample testing
• Remote calibration procedure with custom calibration – Cow, buffalo, mixed milk etc.
• RS232/USB/GPRS/Bluetooth/Wi-Fi/Ethernet interfaces and colour TFT Display with resistive touch screen

With the direct expansion technique, the milk is cooled by direct contact with the evaporator. Because of the free evaporation and proper mixing of the milk, the heat exchange is optimal, a high cooling capacity is guaranteed and freezing is prevented, for any amount of milk ranging from 300 to 10000 Ltrs. In Dx type BMC, we have 3 types of Bulk Milk Coolers:
Open Vertical Tank (350, 500, 1000)
Open Horizontal Tank (1000, 2000)
Closed Cylindrical Tank (2000, 3000, 5000)
Features:
• Energy efficient condensing unit gives fast cooling while saving energy
• East to install, easy to operate and easy to maintain
• Multiple cooling circuits for efficient cooling
• Advance microprocessor-controlled system for optimised cooling efficiency
• Advanced and user-friendly electronic control system and digital indicators

Ice chamber helps in keeping the milk temperature in control till the time it is transported to the nearest chilling centre. It is a cylindrical chamber which has to be kept submerged in the milk can to reduce the temperature of milk and keep it low for some time duration. This is very useful in the areas where chilling centres are not in very close proximity to the farmers.
Features:
• Food quality SS304 manufacturing material
• Corrosion and crack resistant strong body
• Provides extended shelf life to milk
• Suitable for farmers in remote tropical regions

Milk cans are most popular way of transporting milk for small farmers in India. Aluminum cans were used primarily for such purpose but to ensure adherence with food standards usage of SS milk cans is increasing. Milk cans offered by Whitegold technologies are made of food grade AISI 304 (18/8) stainless steel. These cans offer resistance to abrasion and corrosion, mechanical deformation and does not require any coating to prevent corrosion.
Features:
• Strong and sturdy body
• Milk pails, insulated milk cans and cans with lockable lids are available
• Easy use and easy cleaning
• Corrosion and crack resistant
• Provides extended shelf life to milk

Milking used to be a manual task but with increasing herd size, manually milking huge number of cattle is time consuming and inefficient. Milking parlors are designed for optimal cattle and farmer comfort.
As the name suggests, cows stand parallel to each other in this design. So, if the cows are standing side to side, that only leaves one access point for the milker to reach the udder: the rear end! In parallel parlors, milking doesn’t begin until all cows are in their stalls, and they are all released from the parlor at one time. Milking only takes about 10 minutes.
Features:
• Ensures milking more cows in a shorter milking time
• Robust design
• Stress-free animal positioning
• Faster exit option for animals

Solar BMC is one of the best possible alternatives of conventional Dx BMC in tropical regions. Solar powered BMC saves on the recurring cost of grid electricity and comes with battery for storing the excess electricity generated during day time, which can be used to keep the BMC running during night time. Battery can also be connected to grid electricity to charge during long time absences of sunlight.
Features:
• Batteries used are flooded cell lead acid type tubular which lasts up to 8 years
• Protection provided against high and low voltages
• Runs on Battery backup system which is charged by both Solar Energy and Grid Power
• Saving on cost of DG set, maintenance cost, diesel cost, taxes
• Various subsidies and earnings through carbon credits

Milking used to be a manual task but with increasing herd size, manually milking huge number of cattle is time consuming and inefficient. Milking parlors are designed for optimal cattle and farmer comfort.
Tandem parlor designs are not all that different from tandem bikes, in that the cows stand nose-to-tail inside individual stalls. This gives the milker a side-on vantage point of the udder. Cows can be released one at a time, too, so if one cow is moving a little slowly, all her friends don’t have to wait for her to finish.
Features:
• Useful for smaller herd of high yielding cattle
• Allows more individual attention to every individual cow
• Robust design and long-lasting construction
• Allows optimal comfort for cattle and operator

BMC with thermal storage system is also very useful when there is irregular supply of electricity of severe incidents of load shedding. It enables milk farmers to cool the milk even in the absence of grid electricity while reducing the cost and time required for milk cooling significantly. This system cools milk with help of ice chilled water stored in thermal storage system which eliminates the dependency on electricity for milk cooling.

Features:

• Reduced cost of milk cooling
• 75% Bacterial Load is controlled within first 30 mins by ensuring rapid cooling
• Low System Maintenance Cost
• Non-Polluting, Environment friendly
• Easy Operation, skilled labour not required

Distribution vessels are useful to store and distribute food in smaller quantities. Once the food is cooked in bulk quantity at a central location, it has to be distributed in smaller quantities to transport and deliver at required location. Distribution vessels are made of food grade AISI 304 and also comes with strong handles to carry the vessels with food stored inside. These can also be stacked easily one on another which makes them space saver while transporting in vehicles.
Features
• Available in insulated as well as non-insulated variant
• Comes with lids to cover vessels which are interchangeable as well
• Comes with wide opening which makes it easy to distribute and clean
• Strong material makes them long lasting and durables