With the direct expansion technique, the milk is cooled by direct contact with the evaporator. The heat exchange is optimal because of the free evaporation and proper milk mixing. A high cooling capacity is guaranteed, and freezing is prevented for any amount of milk ranging from 300 to 10000 Ltrs.
In Dx type BMC, we have 3 types of Bulk Milk Coolers:
Open Vertical Tank (350, 500, 1000)
Open Horizontal Tank (1000, 2000)
Closed Cylindrical Tank (2000, 3000, 5000)
Features:
• Energy efficient condensing unit gives fast cooling while saving energy
• East to install, easy to operate, and easy to maintain
• Multiple cooling circuits for efficient cooling
• Advance microprocessor-controlled system for optimised cooling efficiency
• Advanced and user-friendly electronic control system and digital indicators
BMC Open Verticle Tank:
Capacity | 300 | 350 | 500 | 500 | 1000 | 1000 |
Overall Length(mm) | 2013 | 2013 | 2013 | 1416 | 1712 | 2500 |
Overall Width (mm) | 1123 | 1123 | 1123 | 1050 | 1465 | 1350 |
Overall Height(mm) | 1202 | 1202 | 1476 | 1450 | 1391 | 1500 |
CU | KCJ 511 | KCJ 511 | KCJ 513 / CR22 | KCJ 513 / CR22 | MT36 / CR36/ MLZ21 | MT36 / CR36/ MLZ21 |
Agitator | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM |
Power | Single Phase | Single Phase | Single Phase / Three Phase | Single Phase / Three Phase | Single Phase / Three Phase | Single Phase / Three Phase |
BMC Open Horizontal Tank
Capacity | 1000 | 2000 |
Overall Length(mm) | 2017 | 2560 |
Overall Width (mm) | 1256 | 1506 |
Overall Height(mm) | 1430 | 1590 |
CU | MT36 / CR36/ MLZ21 | MT36 / CR36/ MLZ21 |
Agitator | Geared Motor with 28 RPM | Geared Motor with 28 RPM |
Power | Single Phase / Three Phase | Three Phase |
BMC Closed Cylindrical Tank
Capacity | 2000 | 3000 | 5000 | 10000 |
Overall Length(mm) | 2318 | 3138 | 3726 | 4217 |
Overall Width (mm) | 1480 | 1480 | 1655 | 2130 |
Overall Height(mm) | 2000 | 2040 | 2237 | 2230 |
CU | MT36 / CR36/ MLZ21 | MT64 / CR53 | MLZ48 | MLZ48 |
Agitator | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM | Geared Motor with 28 RPM |
Power | Three Phase | Three Phase | Three Phase | Three Phase |
BMC with thermal storage system is also very useful when there is irregular supply of electricity of severe incidents of load shedding. It enables milk farmers to cool the milk even in the absence of grid electricity while reducing the cost and time required for milk cooling significantly. This system cools milk with help of ice chilled water stored in thermal storage system which eliminates the dependency on electricity for milk cooling.
Features:
Containerised BMC are efficient solution for remote areas, where finding an appropriate place and construction of building for collection centre is a difficult task. It also saves the cost and hassle of installation and preparation on the collection site as it comes preinstalled in a container.
Features:
• Saves construction cost
• Movable in nature
• Saves time of construction and installation
• Inverter with battery backup saves cost of DG set
A heat recovery unit is an insulated water tank through which pipes carry the refrigerant gas to the refrigerant condenser. Heat released from condenser is usually wasted in the environment. With the help of Heat recovery unit heat from the gas is transferred to the water. This water is used to clean BMC during CIP. This saves on the cost and load of BMC operation which is caused by electric water heater. A heat recovery unit can preheat the water to 65 °C-75 °C, depending on the temperature of the water as it enters the tank and the temperature of gas.
Features:
• Capable to generate 200 Litre Water to 65°C-75°C in one run cycle
• Insulated layer in the body ensures minimal Heat Loss
• Reduces the total Power Consumption up to 20%
• Enhances Profitability of the Dairy
• Modular arrangement can be added on existing BMC’s