Pulsator
• Ratio: 60:40 or 65:35
• Type: Pneumatic
• Material: Thermoplastic Resin
• Weight: 0.300 kgs
• Compact Design
• Low maintenance and reliable long-term performance
• Stainless Steel Cover
Claw
• Capacity: 240 ml / 180 ml
• Milk Inlet Tube: 13.5 x 9.5 mm
• Milk Outlet Tube: 19 x 14 mm
• Air Inlet Tube: 10 x 8 mm
• Air Outlet Tube: 10 x 7.5 mm
• High-density Black Moulded Claw body
Milk cluster unit
• Made of stainless steel (SS 304) and food-grade rubber parts.
• Diameter: 24mm
Tubing (Vacuum tube and milk tube)
• Odourless and Tasteless
• Made from food-grade material
• Long and reliable shelf life
• Transparent and lightweight
Bucket
• Made from SS 304 material
• Easy to clean
• Capacity: 20 / 25 / 40 Litres
• Easy to handle
Vacuum Pump
• Capacity: 200/400 LPM
• Tank Capacity: 20 Litres
• Type: Dry Vane Type/ Oil Lubrication
Electric Motor
• Operating Power: 220V, 50Hz, AC
• RPM: 1440
• Input Power: 1HP/ 2HP
Teat cup
• Design that suits every animal
• Long life gentle milking
• Selected for high productivity
Liner
• Made up from food-grade rubber
• Teat Cups are made from Stainless Steel
Vacuum Gauge
• To monitor vacuum level in the system
![]() |
Catalogue |
Milking machines were designed to minimize human contact with milk which helps in maintaining hygiene during milking and produces with a lower bacterial count. Added benefit of milking machine is saving of cost and time effectively and having maximum output to improve economic benefits for dairy farmers.
Kero-Petro milking machines operate on kerosine as starts with petrol which makes them highly useful for the areas with irregular or no electricity supply.
Features:
• Reduction of dependency on skilled farm workers
• Easy operation
• Reliable and durable motor, vacuum pump and assembly
• Same engine can be used for other operation like chaff cutting etc.
Automatic Cleaning-in-Place (CIP) is an integrated automatic cleaning process designed to maintain hygiene and cleaning of Bulk Milk Cooler with minimum intervention of human. Auto CIP Unit features a programmable interface with ease to amend/ add programs, timelines, dosing, etc. The CIP System cleans pipelines, valves, pumps and tanks.
Features:
• Automatic dosing of chemicals and water
• Pre-installed multiple CIP module
• Provision of recovery heater in case of hot water temperature below 45℃
• Elimination of manual intervention to ensure proper cleaning
• Provision of manual selection in case of power or system failure
A heat recovery unit is an insulated water tank through which pipes carry the refrigerant gas to the refrigerant condenser. Heat released from condenser is usually wasted in the environment. With the help of Heat recovery unit heat from the gas is transferred to the water. This water is used to clean BMC during CIP. This saves on the cost and load of BMC operation which is caused by electric water heater. A heat recovery unit can preheat the water to 65 °C-75 °C, depending on the temperature of the water as it enters the tank and the temperature of gas.
Features:
• Capable to generate 200 Litre Water to 65°C-75°C in one run cycle
• Insulated layer in the body ensures minimal Heat Loss
• Reduces the total Power Consumption up to 20%
• Enhances Profitability of the Dairy
• Modular arrangement can be added on existing BMC’s